Follow up #36842
Migration `326` can be prohibitively slow on large instances because it
scans and rewrites all commit status target URLs generated by Gitea
Actions in the database. This PR refactors migration `326` to perform a
partial update instead of rewriting every legacy target URL. The reason
for this partial rewrite is that **smaller legacy run/job indexes are
the most likely to be ambiguous with run/job ID-based URLs** during
runtime resolution, so this change prioritizes that subset while
avoiding the cost of rewriting all legacy records.
To preserve access to old links, this PR introduces
`resolveCurrentRunForView` to handle both ID-based URLs and index-based
URLs:
- For job pages (`/actions/runs/{run}/jobs/{job}`), it first tries to
confirm that the URL is ID-based. It does so by checking whether `{job}`
can be treated as an existing job ID in the repository and whether that
job belongs to `{run}`. If that match cannot be confirmed, it falls back
to treating the URL as legacy `run index + job index`, resolves the
corresponding run and job, and redirects to the correct ID-based URL.
- When both ID-based and index-based interpretations are valid at the
same time, the resolver **prefers the ID-based interpretation by
default**. For example, if a repository contains one run-job pair
(`run_id=3, run_index=2, job_id=4`), and also another run-job pair
(`run_id=1100, run_index=3, job_id=1200, job_index=4`), then
`/actions/runs/3/jobs/4` is ambiguous. In that case, the resolver treats
it as the ID-based URL by default and shows the page for `run_id=3,
job_id=4`. Users can still explicitly force the legacy index-based
interpretation with `?by_index=1`, which would resolve the same URL to
`/actions/runs/1100/jobs/1200`.
- For run summary pages (`/actions/runs/{run}`), it uses a best-effort
strategy: by default it first treats `{run}` as a run ID, and if no such
run exists in the repository, it falls back to treating `{run}` as a
legacy run index and redirects to the ID-based URL. Users can also
explicitly force the legacy interpretation with `?by_index=1`.
- This summary-page compatibility is best-effort, not a strict ambiguity
check. For example, if a repository contains two runs: runA (`id=7,
index=3`) and runB (`id=99, index=7`), then `/actions/runs/7` will
resolve to runA by default, even though the old index-based URL
originally referred to runB.
The table below shows how valid legacy index-based target URLs are
handled before and after migration `326`. Lower-range legacy URLs are
rewritten to ID-based URLs, while higher-range legacy URLs remain
unchanged in the database but are still handled correctly by
`resolveCurrentRunForView` at runtime.
| run_id | run_index | job_id | job_index | old target URL | updated by
migration 326 | current target URL | can be resolved correctly |
|---|---|---|---|---|---|---|---|
| 3 | 2 | 4 | 1 | `/user2/repo2/actions/runs/2/jobs/1` | true |
`/user2/repo2/actions/runs/3/jobs/4` | true |
| 4 | 3 | 8 | 4 | `/user2/repo2/actions/runs/3/jobs/4` | true |
`/user2/repo2/actions/runs/4/jobs/8` | true (without migration 326, this
URL will resolve to run(`id=3`)) |
| 80 | 20 | 170 | 0 | `/user2/repo2/actions/runs/20/jobs/0` | true |
`/user2/repo2/actions/runs/80/jobs/170` | true |
| 1500 | 900 | 1600 | 0 | `/user2/repo2/actions/runs/900/jobs/0` | false
| `/user2/repo2/actions/runs/900/jobs/0` | true |
| 2400 | 1500 | 2600 | 0 | `/user2/repo2/actions/runs/1500/jobs/0` |
false | `/user2/repo2/actions/runs/1500/jobs/0` | true |
| 2400 | 1500 | 2601 | 1 | `/user2/repo2/actions/runs/1500/jobs/1` |
false | `/user2/repo2/actions/runs/1500/jobs/1` | true |
For users who already ran the old migration `326`, this change has no
functional impact. Their historical URLs are already stored in the
ID-based form, and ID-based URLs continue to resolve correctly.
For users who have not run the old migration `326`, only a subset of
legacy target URLs will now be rewritten during upgrade. This avoids the
extreme runtime cost of the previous full migration, while all remaining
legacy target URLs continue to work through the web-layer compatibility
logic.
Many thanks to @wxiaoguang for the suggestions.
`CanCreateOrgRepo` should be checked before forking a repository into this organization.
---------
Signed-off-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Wrap `zip.NewReader` errors in NuGet `ParsePackageMetaData` and
`ExtractPortablePdb` as `ErrInvalidArgument` so invalid packages return
HTTP 400 (Bad Request) instead of 500 (Internal Server Error).
Add integration test for multipart/form-data NuGet upload path (used by
`dotnet nuget push`) which was previously untested.
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Claude (Opus 4.6) <noreply@anthropic.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Add an optional Name field to webhooks so users can give them
human-readable labels instead of relying only on URLs. The webhook
overview page now displays names when available, or falls back to the
URL for unnamed webhooks.
Fixes#37025
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Treat Commit Status Warnings as errors
> The root problem is that the definition of "warning" are different
across systems.
>
> * Sometimes, "warning" is treated as "acceptable" (Gitea 1.25)
> * Sometimes, "warning" is mapped from "Result.UNSTABLE", which means
"there are test failures" and it is "failure" in Gitea
>
> **To avoid breaking existing users, the best choice is to revert the
behavior on Gitea side: treat "warning" as "error".**
https://github.com/go-gitea/gitea/issues/37042#issuecomment-4158231611
fixes https://github.com/go-gitea/gitea/issues/37042
---------
Signed-off-by: Nicolas <bircni@icloud.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Update golangci-lint from v2.11.2 to v2.11.4 and fix new `modernize`
lint warnings:
- Use `strings.Builder` instead of string concatenation in loop
(`evaluator.go`)
- Use `atomic.Int64` instead of `int64` with atomic free functions
(`logchecker.go`, `timer_test.go`, `integration_test.go`)
---
This PR was written with the help of Claude Opus 4.6
Co-authored-by: Claude (Opus 4.6) <noreply@anthropic.com>
- Add `content_version` field to Issue and PullRequest API responses
- Accept optional `content_version` in `PATCH
/repos/{owner}/{repo}/issues/{index}` and `PATCH
/repos/{owner}/{repo}/pulls/{index}` — returns 409 Conflict when stale,
succeeds silently when omitted (backward compatible)
- Pre-check `content_version` before any mutations to prevent partial
writes (e.g. title updated but body rejected)
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
## ⚠️ BREAKING ⚠️
- delete reaction endpoints is changed to return 204 No Content rather
than 200 with no content.
## Summary
Add swagger:enum annotations and migrate all enum comments from the
deprecated comma-separated format to JSON arrays. Introduce
NotifySubjectStateType with open/closed/merged values. Fix delete
reaction endpoints to return 204 instead of 200.
With Gitea 1.25.4 the workflow event for in_progress was not triggered
for Gitea Actions.
Fixes#36906
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace webpack with Vite 8 as the frontend bundler. Frontend build is
around 3-4 times faster than before. Will work on all platforms
including riscv64 (via wasm).
`iife.js` is a classic render-blocking script in `<head>` (handles web
components/early DOM setup). `index.js` is loaded as a `type="module"`
script in the footer. All other JS chunks are also module scripts
(supported in all browsers since 2018).
Entry filenames are content-hashed (e.g. `index.C6Z2MRVQ.js`) and
resolved at runtime via the Vite manifest, eliminating the `?v=` cache
busting (which was unreliable in some scenarios like vscode dev build).
Replaces: https://github.com/go-gitea/gitea/pull/36896
Fixes: https://github.com/go-gitea/gitea/issues/17793
Signed-off-by: silverwind <me@silverwind.io>
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Claude (Opus 4.6) <noreply@anthropic.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Use shared repo permission resolution for Actions task users in issue
label remove and clear paths, and add a regression test for deleting
issue labels with a Gitea Actions token.
This fixes issue label deletion when the request is authenticated with a
Gitea Actions token.
Fixes#37011
The bug was that the delete path re-resolved repository permissions
using the normal user permission helper, which does not handle Actions
task users. As a result, `DELETE
/api/v1/repos/{owner}/{repo}/issues/{index}/labels/{id}` could return
`500` for Actions tokens even though label listing and label addition
worked.
---------
Co-authored-by: Codex <codex@openai.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR fixes `notifyWorkflowJobStatusUpdate` to send
`WorkflowRunStatusUpdate` for each affected workflow run instead of only
the first run in the input job list.
Pass `ServeHeaderOptions` by value instead of pointer across all call
sites — no nil-check semantics are needed and the struct is small enough
that copying is fine.
## Changes
- **`services/context/base.go`**: `SetServeHeaders` and `ServeContent`
accept `ServeHeaderOptions` (value, not pointer); internal unsafe
pointer cast replaced with a clean type conversion
- **`routers/api/packages/helper/helper.go`**: `ServePackageFile`
variadic changed from `...*context.ServeHeaderOptions` to
`...context.ServeHeaderOptions`; internal variable is now a value type
- **All call sites** (13 files): `&context.ServeHeaderOptions{...}` →
`context.ServeHeaderOptions{...}`
Before/after at the definition level:
```go
// Before
func (b *Base) SetServeHeaders(opt *ServeHeaderOptions) { ... }
func (b *Base) ServeContent(r io.ReadSeeker, opts *ServeHeaderOptions) { ... }
func ServePackageFile(..., forceOpts ...*context.ServeHeaderOptions) { ... }
// After
func (b *Base) SetServeHeaders(opts ServeHeaderOptions) { ... }
func (b *Base) ServeContent(r io.ReadSeeker, opts ServeHeaderOptions) { ... }
func ServePackageFile(..., forceOpts ...context.ServeHeaderOptions) { ... }
```
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wxiaoguang <2114189+wxiaoguang@users.noreply.github.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- content_encoding contains a slash => v4 artifact
- updated proto files to support mime_type and no longer return errors for upload-artifact v7
- json and txt files are now previewed in browser
- normalized content-disposition header creation
- azure blob storage uploads directly in servedirect mode (no proxying data)
- normalize content-disposition headers based on go mime package
- getting both filename and filename* encoding is done via custom code
Closes#36829
-----
Signed-off-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This is a step towards potentially splitting command groups into their
own folders to clean up `cmd/` as one folder for all cli commands.
Returning fresh command instances will also aid in adding tests as you
don't need to concern yourself with the whole command tree being one
mutable variable.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When the email field was submitted as empty in org settings (web and
API), the previous guard `if form.Email != ""` silently skipped the
update, making it impossible to remove a contact email after it was set.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
To align with how GitHub requires additional explicit user interaction
to make a repo private, including informing them of implications on what
happens if they do.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. remove `TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY`
* it defaults to false and is unlikely to be useful for most users (see
#22130)
* with new git versions (>= 2.40), "merge-tree" is used,
"checkConflictsByTmpRepo" isn't called, the option does nothing.
2. fix fragile `db.Cell2Int64` (new: `CellToInt`)
3. allow more routes in maintenance mode (e.g.: captcha)
4. fix MockLocale html escaping to make it have the same behavior as
production locale
## Overview
This PR introduces granular permission controls for Gitea Actions tokens
(`GITEA_TOKEN`), aligning Gitea's security model with GitHub Actions
standards while maintaining compatibility with Gitea's unique repository
unit system.
It addresses the need for finer access control by allowing
administrators and repository owners to define default token
permissions, set maximum permission ceilings, and control
cross-repository access within organizations.
## Key Features
### 1. Granular Token Permissions
- **Standard Keyword Support**: Implements support for the
`permissions:` keyword in workflow and job YAML files (e.g., `contents:
read`, `issues: write`).
- **Permission Modes**:
- **Permissive**: Default write access for most units (backwards
compatible).
- **Restricted**: Default read-only access for `contents` and
`packages`, with no access to other units.
- ~~**Custom**: Allows defining specific default levels for each unit
type (Code, Issues, PRs, Packages, etc.).~~**EDIT removed UI was
confusing**
- **Clamping Logic**: Workflow-defined permissions are automatically
"clamped" by repository or organization-level maximum settings.
Workflows cannot escalate their own permissions beyond these limits.
### 2. Organization & Repository Settings
- **Settings UI**: Added new settings pages at both Organization and
Repository levels to manage Actions token defaults and maximums.
- **Inheritance**: Repositories can be configured to "Follow
organization-level configuration," simplifying management across large
organizations.
- **Cross-Repository Access**: Added a policy to control whether Actions
workflows can access other repositories or packages within the same
organization. This can be set to "None," "All," or restricted to a
"Selected" list of repositories.
### 3. Security Hardening
- **Fork Pull Request Protection**: Tokens for workflows triggered by
pull requests from forks are strictly enforced as read-only, regardless
of repository settings.
- ~~**Package Access**: Actions tokens can now only access packages
explicitly linked to a repository, with cross-repo access governed by
the organization's security policy.~~ **EDIT removed
https://github.com/go-gitea/gitea/pull/36173#issuecomment-3873675346**
- **Git Hook Integration**: Propagates Actions Task IDs to git hooks to
ensure that pushes performed by Actions tokens respect the specific
permissions granted at runtime.
### 4. Technical Implementation
- **Permission Persistence**: Parsed permissions are calculated at job
creation and stored in the `action_run_job` table. This ensures the
token's authority is deterministic throughout the job's lifecycle.
- **Parsing Priority**: Implemented a priority system in the YAML parser
where the broad `contents` scope is applied first, allowing granular
scopes like `code` or `releases` to override it for precise control.
- **Re-runs**: Permissions are re-evaluated during a job re-run to
incorporate any changes made to repository settings in the interim.
### How to Test
1. **Unit Tests**: Run `go test ./services/actions/...` and `go test
./models/repo/...` to verify parsing logic and permission clamping.
2. **Integration Tests**: Comprehensive tests have been added to
`tests/integration/actions_job_token_test.go` covering:
- Permissive vs. Restricted mode behavior.
- YAML `permissions:` keyword evaluation.
- Organization cross-repo access policies.
- Resource access (Git, API, and Packages) under various permission
configs.
3. **Manual Verification**:
- Navigate to **Site/Org/Repo Settings -> Actions -> General**.
- Change "Default Token Permissions" and verify that newly triggered
workflows reflect these changes in their `GITEA_TOKEN` capabilities.
- Attempt a cross-repo API call from an Action and verify the Org policy
is enforced.
## Documentation
Added a PR in gitea's docs for this :
https://gitea.com/gitea/docs/pulls/318
## UI:
<img width="1366" height="619" alt="Screenshot 2026-01-24 174112"
src="https://github.com/user-attachments/assets/bfa29c9a-4ea5-4346-9410-16d491ef3d44"
/>
<img width="1360" height="621" alt="Screenshot 2026-01-24 174048"
src="https://github.com/user-attachments/assets/d5ec46c8-9a13-4874-a6a4-fb379936cef5"
/>
/fixes #24635
/claim #24635
---------
Signed-off-by: Excellencedev <ademiluyisuccessandexcellence@gmail.com>
Signed-off-by: ChristopherHX <christopher.homberger@web.de>
Signed-off-by: silverwind <me@silverwind.io>
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When creating a new repository and copying issue labels from a template,
the explicit sort order of exclusive labels was previously being lost
(resetting to 0). This fix ensures that the original sort order for
exclusive labels (e.g., 1, 2) is properly copied and retained in the
newly created repository.
Fixes#36463
---------
Signed-off-by: Paulo Chen <paulochen@tecnico.ulisboa.pt>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR migrates the web Actions run/job routes from index-based
`runIndex` or `jobIndex` to database IDs.
**⚠️ BREAKING ⚠️**: Existing saved links/bookmarks that use the old
index-based URLs will no longer resolve after this change.
Improvements of this change:
- Previously, `jobIndex` depended on list order, making it hard to
locate a specific job. Using `jobID` provides stable addressing.
- Web routes now align with API, which already use IDs.
- Behavior is closer to GitHub, which exposes run/job IDs in URLs.
- Provides a cleaner base for future features without relying on list
order.
- #36388 this PR improves the support for reusable workflows. If a job
uses a reusable workflow, it may contain multiple child jobs, which
makes relying on job index to locate a job much more complicated
---------
Signed-off-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Hey, I bumped Go to 1.26.1 and fixed a couple of things I ran into while
poking around.
### Changes
- Bump go.mod from 1.26.0 to 1.26.1 (security patch)
- Bump golangci-lint from v2.10.1 to v2.11.2
- Run make tidy, fmt, lint-go
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Claude (Opus 4.6) <noreply@anthropic.com>
`util.URLJoin` was deprecated with unclear semantics (path normalization
via `url.Parse`/`ResolveReference` that surprised callers). This removes
it entirely and replaces all usages with straightforward `"/"` string
concatenation.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wxiaoguang <2114189+wxiaoguang@users.noreply.github.com>
Principles: let the caller decide what it needs, but not let the
framework (middleware) guess what it should do.
Then a lot of hacky code can be removed. And some FIXMEs can be fixed.
This PR introduces a new kind of middleware: "PreMiddleware", it will be
executed before all other middlewares on the same routing level, then a
route can declare its options for other middlewares.
By the way, allow the workflow badge to be accessed by Basic or OAuth2
auth.
Fixes: https://github.com/go-gitea/gitea/pull/36830
Fixes: https://github.com/go-gitea/gitea/issues/36859
- fix wrong parameter of HasOrgOrUserVisible in
routers/api/v1/org/org.go
- add integration tests covering the bug fix
- merge permissions API tests
---
Generated by a coding agent with Codex 5.2
Make `handlePullRequestAutoMerge` correctly check the
permissions of the merging user against pr.BaseRepo.
---------
Co-authored-by: Michael Hoang <enzime@users.noreply.github.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When checking whether a user can update a pull request branch or perform
an update via rebase, a maintainer should inherit the pull request
author’s permissions if Allow maintainer edits is enabled.
---------
Signed-off-by: Lunny Xiao <xiaolunwen@gmail.com>
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Use base64.RawURLEncoding to avoid equal sign
* using the nodejs package they seem to get lost
* Support uploads with unspecified length
* Support uploads with a single named blockid
* without requiring a blockmap
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The design of DefaultShowFullName has some problems, which make the UI
inconsistent, see the new comment in code
This PR does a clean up for various legacy problems, and clarify some
"user name display" behaviors.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The `PATCH /api/v1/repos/{owner}/{repo}` endpoint silently ignores pull
request config fields (like `default_delete_branch_after_merge`,
`allow_squash_merge`, etc.) unless `has_pull_requests: true` is also
included in the request body. This is because the entire PR unit config
block was gated behind `if opts.HasPullRequests != nil`.
This PR restructures the logic so that PR config options are applied
whenever the pull request unit already exists on the repo, without
requiring `has_pull_requests` to be explicitly set. A new unit is only
created when `has_pull_requests: true` is explicitly sent.
Fixes https://github.com/go-gitea/gitea/issues/36466
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds official REST API endpoints to rerun Gitea Actions workflow
runs and individual jobs:
* POST /api/v1/repos/{owner}/{repo}/actions/runs/{run}/rerun
* POST /api/v1/repos/{owner}/{repo}/actions/runs/{run}/jobs/{job_id}/rerun
It reuses the existing rerun behavior from the web UI and exposes it
through stable API routes.
---------
Signed-off-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
In manual merge detected changes, the pushing user should be the
de-facto author of the merge, not the committer. For ff-only merges, the
author (PR owner) often have nothing to do with the merger. Similarly,
even if a merge commit exists, it does not indicate that the merge
commit author is the merger. This is especially true if the merge commit
is a ff-only merge on a given branch.
If pusher is for some reason unavailable, we fall back to the old method
of using committer or owning organization as the author.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
After many years, "activitypub" is still "in progress" and no real
progress for end users. So it is not mature.
Temporarily mark the endpoints as "501 not implemented",
and wait until the whole design is stable and usable.
At logout time, if the user authenticated via OIDC, we look up the
provider's `end_session_endpoint` (already discovered by Goth from the
OIDC metadata) and redirect there with `client_id` and
`post_logout_redirect_uri`.
Non-OIDC OAuth2 providers (GitHub, GitLab, etc.) are unaffected — they
fall back to local-only logout.
Fix#14270
---------
Signed-off-by: Nikita Vakula <nikita.vakula@alpsalpine.com>
Co-authored-by: Nikita Vakula <nikita.vakula@alpsalpine.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
I was testing typos-cli and fixed some misspelled wording here.
All changes are internal — no public API fields, database columns,
locale keys, or migration names are affected.
The banner allows site operators to communicate important announcements
(e.g., maintenance windows, policy updates, service notices) directly
within the UI.
The maintenance mode only allows admin to access the web UI.
* Fix#2345
* Fix#9618
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This patch adds the created_by filter to the SearchIssues method.
tea cli has an option to filter by author when listing issues, but it's
not working. The tea command line creates this request for the API when
using the author filter:
```
$ tea issue list -l local --kind pull -A danigm -vvv http://localhost:3000/api/v1/repos/issues/search?created_by=danigm&labels=&limit=30&milestones=&page=1&state=open&type=pulls
```
This patch fixes the API to allow this kind of queries from go-sdk and
tea cli.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
