salt-formula/salt/files/master.d/f_defaults.conf

# This file managed by Salt, do not edit by hand!!
# Based on salt version 2015.8.7 default config
{% set reserved_keys = ['master', 'minion', 'cloud', 'salt_cloud_certs', 'engines', 'lxc.network_profile', 'lxc.container_profile'] -%}
{% set cfg_salt = pillar.get('salt', {}) -%}
{% set cfg_master = cfg_salt.get('master', {}) -%}
{% set default_keys = [] -%}
{%- macro get_config(configname, default_value) -%}
{%- do default_keys.append(configname) %}
{%- if configname in cfg_master -%}
{{ configname }}: {{ cfg_master[configname]|json }}
{%- elif configname in cfg_salt and configname not in reserved_keys -%}
{{ configname }}: {{ cfg_salt[configname]|json }}
{%- else -%}
#{{ configname }}: {{ default_value|json }}
{%- endif -%}
{%- endmacro -%}
{%- from 'salt/formulas.jinja' import file_roots, formulas with context -%}
##### Primary configuration settings #####
##########################################
# This configuration file is used to manage the behavior of the Salt Master.
# Values that are commented out but have an empty line after the comment are
# defaults that do not need to be set in the config. If there is no blank line
# after the comment then the value is presented as an example and is not the
# default.

# The id to be passed in the publish job to minions.
# This is used for MultiSyndics to return the job to the requesting master.
# This must be the same string as the syndic is configured with.
# master_id: None
{{ get_config('master_id', 'None') }}

# Per default, the master will automatically include all config files
# from master.d/*.conf (master.d is a directory in the same directory
# as the main master config file).
{{ get_config('default_include', 'master.d/*.conf') }}

# The address of the interface to bind to:
{{ get_config('interface', '0.0.0.0') }}

# Whether the master should listen for IPv6 connections. If this is set to True,
# the interface option must be adjusted, too. (For example: "interface: '::'")
{{ get_config('ipv6', 'False') }}

# The tcp port used by the publisher:
{{ get_config('publish_port', '4505') }}

# The user under which the salt master will run. Salt will update all
# permissions to allow the specified user to run the master. The exception is
# the job cache, which must be deleted if this user is changed. If the
# modified files cause conflicts, set verify_env to False.
{{ get_config('user', 'root') }}

# The port used by the communication interface. The ret (return) port is the
# interface used for the file server, authentication, job returns, etc.
{{ get_config('ret_port', '4506') }}

# Specify the location of the daemon process ID file:
{{ get_config('pidfile', '/var/run/salt-master.pid') }}

# The root directory prepended to these options: pki_dir, cachedir,
# sock_dir, log_file, autosign_file, autoreject_file, extension_modules,
# key_logfile, pidfile:
{{ get_config('root_dir', '/') }}

# Directory used to store public key data:
{{ get_config('pki_dir', '/etc/salt/pki/master') }}

# Directory to store job and cache data:
# This directory may contain sensitive data and should be protected accordingly.
#
{{ get_config('cachedir', '/var/cache/salt/master') }}

# Directory for custom modules. This directory can contain subdirectories for
# each of Salt's module types such as "runners", "output", "wheel", "modules",
# "states", "returners", etc.
{{ get_config('extension_modules', '<no default>') }}

# Directory for custom modules. This directory can contain subdirectories for
# each of Salt's module types such as "runners", "output", "wheel", "modules",
# "states", "returners", etc.
# Like 'extension_modules' but can take an array of paths
{% if 'module_dirs' in cfg_master -%}
{%- do default_keys.append('module_dirs') %}
module_dirs:
  {%- for dir in cfg_master['module_dirs'] %}
  - {{ dir}}
  {%- endfor -%}
{% elif 'module_dirs' in cfg_salt -%}
module_dirs:
  {%- for dir in cfg_salt['module_dirs'] %}
  - {{ dir}}
  {%- endfor -%}
{% else -%}
#module_dirs: <no default>
#   - /var/cache/salt/minion/extmods
{% endif %}

# Verify and set permissions on configuration directories at startup:
{{ get_config('verify_env', 'True') }}

# Set the number of hours to keep old job information in the job cache:
{{ get_config('keep_jobs', '24') }}

# Set the default timeout for the salt command and api. The default is 5
# seconds.
{{ get_config('timeout', '5') }}

# The loop_interval option controls the seconds for the master's maintenance
# process check cycle. This process updates file server backends, cleans the
# job cache and executes the scheduler.
{{ get_config('loop_interval', '60') }}

# Set the default outputter used by the salt command. The default is "nested".
{{ get_config('output', 'nested') }}

# Return minions that timeout when running commands like test.ping
{{ get_config('show_timeout', 'True') }}

# By default, output is colored. To disable colored output, set the color value
# to False.
{{ get_config('color', 'True') }}

# Do not strip off the colored output from nested results and state outputs
# (true by default).
{{ get_config('strip_colors', 'False') }}

# Set the directory used to hold unix sockets:
{{ get_config('sock_dir', '/var/run/salt/master') }}

# The master can take a while to start up when lspci and/or dmidecode is used
# to populate the grains for the master. Enable if you want to see GPU hardware
# data for your master.
{{ get_config('enable_gpu_grains', 'False') }}

# The master maintains a job cache. While this is a great addition, it can be
# a burden on the master for larger deployments (over 5000 minions).
# Disabling the job cache will make previously executed jobs unavailable to
# the jobs system and is not generally recommended.
{{ get_config('job_cache', 'True') }}

# Cache minion grains and pillar data in the cachedir.
{{ get_config('minion_data_cache', 'True') }}

# Store all returns in the given returner.
# Setting this option requires that any returner-specific configuration also
# be set. See various returners in salt/returners for details on required
# configuration values. (See also, event_return_queue below.)
{{ get_config('event_return', 'mysql') }}

# On busy systems, enabling event_returns can cause a considerable load on
# the storage system for returners. Events can be queued on the master and
# stored in a batched fashion using a single transaction for multiple events.
# By default, events are not queued.
{{ get_config('event_return_queue', '0') }}

# Only events returns matching tags in a whitelist
{% if 'event_return_whitelist' in cfg_master -%}
{%- do default_keys.append('event_return_whitelist') %}
event_return_whitelist:
  {%- for event_return in cfg_master['event_return_whitelist'] %}
  - {{ event_return }}
  {%- endfor -%}
{% elif 'event_return_whitelist' in cfg_salt -%}
event_return_whitelist:
  {%- for event_return in cfg_salt['event_return_whitelist'] %}
  - {{ event_return }}
  {%- endfor -%}
{% else -%}
# event_return_whitelist:
#   - salt/master/a_tag
#   - salt/master/another_tag
{% endif %}

# Store all event returns _except_ the tags in a blacklist
{% if 'event_return_blacklist' in cfg_master -%}
{%- do default_keys.append('event_return_blacklist') %}
event_return_blacklist:
  {%- for event_return in cfg_master['event_return_blacklist'] %}
  - {{ event_return }}
  {%- endfor -%}
{% elif 'event_return_blacklist' in cfg_salt -%}
event_return_blacklist:
  {%- for event_return in cfg_salt['event_return_blacklist'] %}
  - {{ event_return }}
  {%- endfor -%}
{% else -%}
# event_return_blacklist:
#   - salt/master/not_this_tag
#   - salt/master/or_this_one
{% endif %}

# Passing very large events can cause the minion to consume large amounts of
# memory. This value tunes the maximum size of a message allowed onto the
# master event bus. The value is expressed in bytes.
{{ get_config('max_event_size', '1048576') }}

# By default, the master AES key rotates every 24 hours. The next command
# following a key rotation will trigger a key refresh from the minion which may
# result in minions which do not respond to the first command after a key refresh.
#
# To tell the master to ping all minions immediately after an AES key refresh, set
# ping_on_rotate to True. This should mitigate the issue where a minion does not
# appear to initially respond after a key is rotated.
#
# Note that ping_on_rotate may cause high load on the master immediately after
# the key rotation event as minions reconnect. Consider this carefully if this
# salt master is managing a large number of minions.
#
# If disabled, it is recommended to handle this event by listening for the
# 'aes_key_rotate' event with the 'key' tag and acting appropriately.
{{ get_config('ping_on_rotate', 'False') }}

# By default, the master deletes its cache of minion data when the key for that
# minion is removed. To preserve the cache after key deletion, set
# 'preserve_minion_cache' to True.
#
# WARNING: This may have security implications if compromised minions auth with
# a previous deleted minion ID.
{{ get_config('preserve_minion_cache', 'False') }}

# If max_minions is used in large installations, the master might experience
# high-load situations because of having to check the number of connected
# minions for every authentication. This cache provides the minion-ids of
# all connected minions to all MWorker-processes and greatly improves the
# performance of max_minions.
{{ get_config('con_cache', 'False') }}

# The master can include configuration from other files. To enable this,
# pass a list of paths to this option. The paths can be either relative or
# absolute; if relative, they are considered to be relative to the directory
# the main master configuration file lives in (this file). Paths can make use
# of shell-style globbing. If no files are matched by a path passed to this
# option, then the master will log a warning message.
#
# Include a config file from some other path:
# include: /etc/salt/extra_config
#
# Include config from several files and directories:
# include:
#   - /etc/salt/extra_config
{{ get_config('include', '[]') }}

#####  Large-scale tuning settings   #####
##########################################
# Max open files
#
# Each minion connecting to the master uses AT LEAST one file descriptor, the
# master subscription connection. If enough minions connect you might start
# seeing on the console (and then salt-master crashes):
#   Too many open files (tcp_listener.cpp:335)
#   Aborted (core dumped)
#
# By default this value will be the one of `ulimit -Hn`, ie, the hard limit for
# max open files.
#
# If you wish to set a different value than the default one, uncomment and
# configure this setting. Remember that this value CANNOT be higher than the
# hard limit. Raising the hard limit depends on your OS and/or distribution,
# a good way to find the limit is to search the internet. For example:
#   raise max open files hard limit debian
#
{{ get_config('max_open_files', '100000') }}

# The number of worker threads to start. These threads are used to manage
# return calls made from minions to the master. If the master seems to be
# running slowly, increase the number of threads. This setting can not be
# set lower than 3.
{{ get_config('worker_threads', '5') }}

# Set the ZeroMQ high water marks
# http://api.zeromq.org/3-2:zmq-setsockopt

# The publisher interface ZeroMQPubServerChannel
{{ get_config('pub_hwm', '1000') }}

# These two ZMQ HWM settings, salt_event_pub_hwm and event_publisher_pub_hwm
# are significant for masters with thousands of minions.  When these are
# insufficiently high it will manifest in random responses missing in the CLI
# and even missing from the job cache.  Masters that have fast CPUs and many
# cores with appropriate worker_threads will not need these set as high.

# On deployment with 8,000 minions, 2.4GHz CPUs, 24 cores, 32GiB memory has
# these settings:
#
#   salt_event_pub_hwm: 128000
#   event_publisher_pub_hwm: 64000

# ZMQ high-water-mark for SaltEvent pub socket
{{ get_config('salt_event_pub_hwm', '20000') }}

# ZMQ high-water-mark for EventPublisher pub socket
{{ get_config('event_publisher_pub_hwm', '10000') }}


#####        Security settings       #####
##########################################
# Enable "open mode", this mode still maintains encryption, but turns off
# authentication, this is only intended for highly secure environments or for
# the situation where your keys end up in a bad state. If you run in open mode
# you do so at your own risk!
{{ get_config('open_mode', 'False') }}

# Enable auto_accept, this setting will automatically accept all incoming
# public keys from the minions. Note that this is insecure.
{{ get_config('auto_accept', 'False') }}

# Time in minutes that a incoming public key with a matching name found in
# pki_dir/minion_autosign/keyid is automatically accepted. Expired autosign keys
# are removed when the master checks the minion_autosign directory.
# 0 equals no timeout
{{ get_config('autosign_timeout', '120') }}

# If the autosign_file is specified, incoming keys specified in the
# autosign_file will be automatically accepted. This is insecure.  Regular
# expressions as well as globing lines are supported.
{{ get_config('autosign_file', '/etc/salt/autosign.conf') }}

# Works like autosign_file, but instead allows you to specify minion IDs for
# which keys will automatically be rejected. Will override both membership in
# the autosign_file and the auto_accept setting.
{{ get_config('autoreject_file', '/etc/salt/autoreject.conf') }}

# Enable permissive access to the salt keys. This allows you to run the
# master or minion as root, but have a non-root group be given access to
# your pki_dir. To make the access explicit, root must belong to the group
# you've given access to. This is potentially quite insecure. If an autosign_file
# is specified, enabling permissive_pki_access will allow group access to that
# specific file.
{{ get_config('permissive_pki_access', 'False') }}

# Allow users on the master access to execute specific commands on minions.
# This setting should be treated with care since it opens up execution
# capabilities to non root users. By default this capability is completely
# disabled.
{% if 'client_acl' in cfg_master -%}
{%- do default_keys.append('client_acl') %}
client_acl:
{%- for name, user in cfg_master['client_acl']|dictsort %}
  {{ name}}:
{%- for command in user %}
    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
{%- endfor -%}
{%- endfor -%}
{% elif 'client_acl' in cfg_salt -%}
client_acl:
{%- for name, user in cfg_salt['client_acl']|dictsort %}
  {{ name }}:
{%- for command in user %}
    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
{%- endfor -%}
{%- endfor -%}
{% else -%}
#client_acl:
#  larry:
#    - test.ping
#    - network.*
{%- endif %}

# Blacklist any of the following users or modules
#
# This example would blacklist all non sudo users, including root from
# running any commands. It would also blacklist any use of the "cmd"
# module. This is completely disabled by default.
{% if 'client_acl_blacklist' in cfg_master %}
{%- do default_keys.append('client_acl_blacklist') %}
client_acl_blacklist:
  users:
  {% for user in cfg_master['client_acl_blacklist'].get('users', []) %}
    - {{ user }}
  {% endfor %}
  modules:
  {% for mod in cfg_master['client_acl_blacklist'].get('modules', []) %}
    - {{ mod }}
  {% endfor %}
{% elif 'client_acl_blacklist' in cfg_salt  %}
client_acl_blacklist:
  users:
  {% for user in cfg_salt['client_acl_blacklist'].get('users', []) %}
    - {{ user }}
  {% endfor %}
  modules:
  {% for mod in cfg_salt['client_acl_blacklist'].get('modules', []) %}
    - {{ mod }}
  {% endfor %}
{% else %}
#client_acl_blacklist:
#  users:
#    - root
#    - '^(?!sudo_).*$'   #  all non sudo users
#  modules:
#    - cmd
{% endif %}

# Enforce client_acl & client_acl_blacklist when users have sudo
# access to the salt command.
{{ get_config('sudo_acl', 'False') }}

# The external auth system uses the Salt auth modules to authenticate and
# validate users to access areas of the Salt system.
#external_auth:
#  pam:
#    fred:
#      - test.*
{{ get_config('external_auth', '{}') }}

# Time (in seconds) for a newly generated token to live. Default: 12 hours
{{ get_config('token_expire', '43200') }}

# Allow minions to push files to the master. This is disabled by default, for
# security purposes.
{{ get_config('file_recv', 'False') }}

# Set a hard-limit on the size of the files that can be pushed to the master.
# It will be interpreted as megabytes. Default: 100
{{ get_config('file_recv_max_size', '100') }}

# Signature verification on messages published from the master.
# This causes the master to cryptographically sign all messages published to its event
# bus, and minions then verify that signature before acting on the message.
#
# This is False by default.
#
# Note that to facilitate interoperability with masters and minions that are different
# versions, if sign_pub_messages is True but a message is received by a minion with
# no signature, it will still be accepted, and a warning message will be logged.
# Conversely, if sign_pub_messages is False, but a minion receives a signed
# message it will be accepted, the signature will not be checked, and a warning message
# will be logged. This behavior went away in Salt 2014.1.0 and these two situations
# will cause minion to throw an exception and drop the message.
{{ get_config('sign_pub_message', 'False') }}

# Sign the master auth-replies with a cryptographic signature of the masters public key.
# Please see the tutorial how to use these settings in the Multimaster-PKI with Failover Tutorial
{{ get_config('master_sign_pubkey', 'False') }}

# The customizable name of the signing-key-pair without suffix.
# master_sign_key_name: <filename_without_suffix>
{{ get_config('master_sign', '{}') }}

# The name of the file in the masters pki-directory that holds the pre-calculated
# signature of the masters public-key.
# master_pubkey_signature: <filename>
{{ get_config('master_pubkey_signature', '{}') }}

# Instead of computing the signature for each auth-reply, use a pre-calculated signature.
# The master_pubkey_signature must also be set for this.
{{ get_config('master_use_pubkey_signature', 'False') }}

# Rotate the salt-masters AES-key when a minion-public is deleted with salt-key.
# This is a very important security-setting. Disabling it will enable deleted minions to still
# listen in on the messages published by the salt-master.
# Do not disable this unless it is absolutely clear what this does.
{{ get_config('rotate_aes_key', 'True') }}

# Unique ID attribute name for the user. For Active Directory should be set
# to 'sAMAccountName'. Default value is 'memberUid'.
{{ get_config('auth.ldap.accountattributename', 'memberUid') }}

# Set this to True if LDAP is Active Directory. Default is False
{{ get_config('auth.ldap.activedirectory', False) }}

# Bind to LDAP anonymously to determine group membership
# Active Directory does not allow anonymous binds without special configuration
{{ get_config('auth.ldap.anonymous', False) }}

# The base DN under which users can be found in LDAP
{{ get_config('auth.ldap.basedn', '') }}

# The user Salt authenticates to search for a users' Distinguished Name and
# group membership.
{{ get_config('auth.ldap.binddn', '') }}

# The bind password to go along with the bind dn (binddn).
{{ get_config('auth.ldap.bindpw', '') }}

# The filter used to find the DN associated with a user. For most LDAPs use
# the value {% raw %}'uid={{ username }}'{% endraw %}. For Active Directory use the value
# {% raw %}'sAMAccountName={{username}}'{% endraw %}.
{{ get_config('auth.ldap.filter', '') }}

# The attribute used for user group membership. Defaults to 'memberOf'
{{ get_config('auth.ldap.groupattribute', 'memberOf') }}

# LDAP group class. Use 'group' for Active Directory. Defaults to 'posixGroup'
{{ get_config('auth.ldap.groupclass', 'posixGroup') }}

# To specify an OU that contains group data. Not used for Active Directory
# Default value: 'Groups'
{{ get_config('auth.ldap.groupou', 'Groups') }}

# Allows the administrator to strip off a certain set of domain names
# so the hostnames looked up in the directory service can match the minion IDs.
{{ get_config('auth.ldap.minion_stripdomains', []) }}

# Verify server's TLS certificate. Default value: False
{{ get_config('auth.ldap.no_verify', False) }}

# Only for Active Directory. Default value: 'person'
{{ get_config('auth.ldap.persontype', 'person') }}

# Port to connect via. Default value: '389'
{{ get_config('auth.ldap.port', '389') }}

# LDAP scope level, almost always 2. Default value: 2
{{ get_config('auth.ldap.scope', 2) }}

# Server to auth against. Default value: 'localhost'
{{ get_config('auth.ldap.server', 'localhost') }}

# Use TLS when connecting. Default value: False
{{ get_config('auth.ldap.tls', False) }}

# Server specified in URI format. Overrides .ldap.server, .ldap.port,
# .ldap.tls. Default value: ''
{{ get_config('auth.ldap.uri', '') }}

#####     Salt-SSH Configuration     #####
##########################################

# Pass in an alternative location for the salt-ssh roster file
{{ get_config('roster_file', '/etc/salt/roster') }}

# Pass in minion option overrides that will be inserted into the SHIM for
# salt-ssh calls. The local minion config is not used for salt-ssh. Can be
# overridden on a per-minion basis in the roster (`minion_opts`)
#ssh_minion_opts:
#  gpg_keydir: /root/gpg
{{ get_config('ssh_minion_opts', '{}') }}

#####    Master Module Management    #####
##########################################
# Manage how master side modules are loaded.

# Add any additional locations to look for master runners:
{{ get_config('runner_dirs', '[]') }}

# Enable Cython for master side modules:
{{ get_config('cython_enable', 'False') }}


#####      State System settings     #####
##########################################
# The state system uses a "top" file to tell the minions what environment to
# use and what modules to use. The state_top file is defined relative to the
# root of the base environment as defined in "File Server settings" below.
{{ get_config('state_top', 'top.sls') }}

# The master_tops option replaces the external_nodes option by creating
# a plugable system for the generation of external top data. The external_nodes
# option is deprecated by the master_tops option.
#
# To gain the capabilities of the classic external_nodes system, use the
# following configuration:
# master_tops:
#   ext_nodes: <Shell command which returns yaml>
#
#master_tops: {}
{% if 'master_tops' in cfg_master %}
{%- do default_keys.append('master_tops') %}
master_tops:
{%- for master in cfg_master['master_tops'] -%}
  {%- if cfg_master['master_tops'][master] is string %}
  {{ master }}: {{ cfg_master['master_tops'][master] }}
  {%- else %}
  {{ master}}:
    {%- for parameter in cfg_master['master_tops'][master] %}
    {{ parameter }}: {{ cfg_master['master_tops'][master][parameter] }}
    {%- endfor -%}
  {%- endif -%}
{%- endfor %}
{% endif %}

# The external_nodes option allows Salt to gather data that would normally be
# placed in a top file. The external_nodes option is the executable that will
# return the ENC data. Remember that Salt will look for external nodes AND top
# files and combine the results if both are enabled!
{{ get_config('external_nodes', 'None') }}

# The renderer to use on the minions to render the state data
{{ get_config('renderer', 'yaml_jinja') }}

# The Jinja renderer can strip extra carriage returns and whitespace
# See http://jinja.pocoo.org/docs/api/#high-level-api
#
# If this is set to True the first newline after a Jinja block is removed
# (block, not variable tag!). Defaults to False, corresponds to the Jinja
# environment init variable "trim_blocks".
{{ get_config('jinja_trim_blocks', 'False') }}

# If this is set to True leading spaces and tabs are stripped from the start
# of a line to a block. Defaults to False, corresponds to the Jinja
# environment init variable "lstrip_blocks".
{{ get_config('jinja_lstrip_blocks', 'False') }}

# The failhard option tells the minions to stop immediately after the first
# failure detected in the state execution, defaults to False
{{ get_config('failhard', 'False') }}

# The state_verbose and state_output settings can be used to change the way
# state system data is printed to the display. By default all data is printed.
# The state_verbose setting can be set to True or False, when set to False
# all data that has a result of True and no changes will be suppressed.
{{ get_config('state_verbose', 'True') }}

# The state_output setting changes if the output is the full multi line
# output for each changed state if set to 'full', but if set to 'terse'
# the output will be shortened to a single line.  If set to 'mixed', the output
# will be terse unless a state failed, in which case that output will be full.
# If set to 'changes', the output will be full unless the state didn't change.
{{ get_config('state_output', 'full') }}

# Automatically aggregate all states that have support for mod_aggregate by
# setting to 'True'. Or pass a list of state module names to automatically
# aggregate just those types.
#
# state_aggregate:
#   - pkg
#
#state_aggregate: False
{{ get_config('state_aggregate', '{}') }}

# Send progress events as each function in a state run completes execution
# by setting to 'True'. Progress events are in the format
# 'salt/job/<JID>/prog/<MID>/<RUN NUM>'.
{{ get_config('state_events', 'False') }}

# Enable extra routines for YAML renderer used states containing UTF characters.
{{ get_config('yaml_utf8', 'False') }}

#####      File Server settings      #####
##########################################
# Salt runs a lightweight file server written in zeromq to deliver files to
# minions. This file server is built into the master daemon and does not
# require a dedicated port.

# The file server works on environments passed to the master, each environment
# can have multiple root directories, the subdirectories in the multiple file
# roots cannot match, otherwise the downloaded files will not be able to be
# reliably ensured. A base environment is required to house the top file.
# Example:
# file_roots:
#   base:
#     - /srv/salt/
#   dev:
#     - /srv/salt/dev/services
#     - /srv/salt/dev/states
#   prod:
#     - /srv/salt/prod/services
#     - /srv/salt/prod/states
#
{% if 'file_roots' in cfg_master -%}
{%- do default_keys.append('file_roots') %}
{{ file_roots(cfg_master['file_roots']) }}
{%- elif 'file_roots' in cfg_salt -%}
{{ file_roots(cfg_salt['file_roots']) }}
{%- elif formulas|length -%}
{{ file_roots({'base': ['/srv/salt']}) }}
{%- else -%}
#file_roots:
#  base:
#    - /srv/salt
{%- endif %}

# When using multiple environments, each with their own top file, the
# default behaviour is an unordered merge. To prevent top files from
# being merged together and instead to only use the top file from the
# requested environment, set this value to 'same'.
{{ get_config('top_file_merging_strategy', 'merge') }}

# To specify the order in which environments are merged, set the ordering
# in the env_order option. Given a conflict, the last matching value will
# win.
{{ get_config('env_order', '["base", "dev", "prod"]') }}

# If top_file_merging_strategy is set to 'same' and an environment does not
# contain a top file, the top file in the environment specified by default_top
# will be used instead.
{{ get_config('default_top', 'base') }}

# The hash_type is the hash to use when discovering the hash of a file on
# the master server. The default is md5, but sha1, sha224, sha256, sha384
# and sha512 are also supported.
#
# Prior to changing this value, the master should be stopped and all Salt
# caches should be cleared.
{{ get_config('hash_type', 'md5') }}

# The buffer size in the file server can be adjusted here:
{{ get_config('file_buffer_size', '1048576') }}

# A regular expression (or a list of expressions) that will be matched
# against the file path before syncing the modules and states to the minions.
# This includes files affected by the file.recurse state.
# For example, if you manage your custom modules and states in subversion
# and don't want all the '.svn' folders and content synced to your minions,
# you could set this to '/\.svn($|/)'. By default nothing is ignored.
{% if 'file_ignore_regex' in cfg_master %}
{%- do default_keys.append('file_ignore_regex') %}
file_ignore_regex:
  {% for regex in cfg_master['file_ignore_regex'] %}
  - {{ regex }}
  {% endfor %}
{% elif 'file_ignore_regex' in cfg_salt %}
file_ignore_regex:
  {% for regex in cfg_salt['file_ignore_regex'] %}
  - {{ regex }}
  {% endfor %}
{% else %}
#file_ignore_regex:
#  - '/\.svn($|/)'
#  - '/\.git($|/)'
{% endif %}

# A file glob (or list of file globs) that will be matched against the file
# path before syncing the modules and states to the minions. This is similar
# to file_ignore_regex above, but works on globs instead of regex. By default
# nothing is ignored.
{% if 'file_ignore_glob' in cfg_master %}
{%- do default_keys.append('file_ignore_glob') %}
file_ignore_glob:
  {% for glob in cfg_master['file_ignore_glob'] %}
  - {{ glob }}
  {% endfor %}
{% elif 'file_ignore_glob' in cfg_salt %}
file_ignore_glob:
  {% for glob in cfg_salt['file_ignore_glob'] %}
  - {{ glob }}
  {% endfor %}
{% else %}
# file_ignore_glob:
#  - '*.pyc'
#  - '*/somefolder/*.bak'
#  - '*.swp'
{% endif %}

# File Server Backend
#
# Salt supports a modular fileserver backend system, this system allows
# the salt master to link directly to third party systems to gather and
# manage the files available to minions. Multiple backends can be
# configured and will be searched for the requested file in the order in which
# they are defined here. The default setting only enables the standard backend
# "roots" which uses the "file_roots" option.
#fileserver_backend:
#  - roots
#
# To use multiple backends list them in the order they are searched:
#fileserver_backend:
#  - git
#  - roots
{% if 'fileserver_backend' in cfg_master -%}
{%- do default_keys.append('fileserver_backend') %}
fileserver_backend:
{%- for backend in cfg_master['fileserver_backend'] %}
  - {{ backend }}
{%- endfor -%}
{%- endif %}

# Uncomment the line below if you do not want the file_server to follow
# symlinks when walking the filesystem tree. This is set to True
# by default. Currently this only applies to the default roots
# fileserver_backend.
{{ get_config('fileserver_followsymlinks', 'False') }}

# Uncomment the line below if you do not want symlinks to be
# treated as the files they are pointing to. By default this is set to
# False. By uncommenting the line below, any detected symlink while listing
# files on the Master will not be returned to the Minion.
{{ get_config('fileserver_ignoresymlinks', 'True') }}

# By default, the Salt fileserver recurses fully into all defined environments
# to attempt to find files. To limit this behavior so that the fileserver only
# traverses directories with SLS files and special Salt directories like _modules,
# enable the option below. This might be useful for installations where a file root
# has a very large number of files and performance is impacted. Default is False.
{{ get_config('fileserver_limit_traversal', 'False') }}

# The fileserver can fire events off every time the fileserver is updated,
# these are disabled by default, but can be easily turned on by setting this
# flag to True
{{ get_config('fileserver_events', 'False') }}

# Git File Server Backend Configuration
#
# Optional parameter used to specify the provider to be used for gitfs. Must
# be one of the following: pygit2, gitpython, or dulwich. If unset, then each
# will be tried in that same order, and the first one with a compatible
# version installed will be the provider that is used.
{{ get_config('gitfs_provider', 'pygit2') }}

# Along with gitfs_password, is used to authenticate to HTTPS remotes.
{{ get_config('gitfs_user', 'git') }}

# Along with gitfs_user, is used to authenticate to HTTPS remotes.
# This parameter is not required if the repository does not use authentication.
{{ get_config('gitfs_password', '') }}

# By default, Salt will not authenticate to an HTTP (non-HTTPS) remote.
# This parameter enables authentication over HTTP. Enable this at your own risk.
{{ get_config('gitfs_insecure_auth', 'False') }}

# Along with gitfs_privkey (and optionally gitfs_passphrase), is used to
# authenticate to SSH remotes. This parameter (or its per-remote counterpart)
# is required for SSH remotes.
{{ get_config('gitfs_pubkey', '') }}

# Along with gitfs_pubkey (and optionally gitfs_passphrase), is used to
# authenticate to SSH remotes. This parameter (or its per-remote counterpart)
# is required for SSH remotes.
{{ get_config('gitfs_privkey', '') }}

# This parameter is optional, required only when the SSH key being used to
# authenticate is protected by a passphrase.
{{ get_config('gitfs_passphrase', '') }}

# When using the git fileserver backend at least one git remote needs to be
# defined. The user running the salt master will need read access to the repo.
#
# The repos will be searched in order to find the file requested by a client
# and the first repo to have the file will return it.
# When using the git backend branches and tags are translated into salt
# environments.
# Note:  file:// repos will be treated as a remote, so refs you want used must
# exist in that repo as *local* refs.
{% if 'gitfs_remotes' in cfg_master -%}
{%- do default_keys.append('gitfs_remotes') %}
gitfs_remotes:
{%- for remote in cfg_master['gitfs_remotes'] %}
{%- if remote is iterable and remote is not string %}
  {%- for repo, children in remote.items() %}
    - {{ repo }}:
  {%- for child in children %}
    {%- for key, value in child.items() %}
      - {{ key }}: {{ value }}
    {%- endfor -%}
  {%- endfor -%}
  {%- endfor -%}
  {%- else %}
    - {{ remote }}
{%- endif -%}
{%- endfor -%}
{%- endif %}

#gitfs_remotes:
#  - git://github.com/saltstack/salt-states.git
#  - file:///var/git/saltmaster
#
# The gitfs_ssl_verify option specifies whether to ignore ssl certificate
# errors when contacting the gitfs backend. You might want to set this to
# false if you're using a git backend that uses a self-signed certificate but
# keep in mind that setting this flag to anything other than the default of True
# is a security concern, you may want to try using the ssh transport.
{{ get_config('gitfs_ssl_verify', 'True') }}

# The gitfs_root option gives the ability to serve files from a subdirectory
# within the repository. The path is defined relative to the root of the
# repository and defaults to the repository root.
{{ get_config('gitfs_root', 'somefolder/otherfolder') }}

# The gitfs_env_whitelist and gitfs_env_blacklist parameters allow for greater
# control over which branches/tags are exposed as fileserver environments.
{% if 'gitfs_env_whitelist' in cfg_master -%}
{%- do default_keys.append('gitfs_env_whitelist') %}
gitfs_env_whitelist:
  {%- for git_env in cfg_master['gitfs_env_whitelist'] %}
  - {{ git_env }}
  {%- endfor -%}
{% else -%}
# gitfs_env_whitelist:
#   - base
#   - v1.*
{% endif %}

{% if 'gitfs_env_blacklist' in cfg_master -%}
{%- do default_keys.append('gitfs_env_blacklist') %}
gitfs_env_blacklist:
  {%- for git_env in cfg_master['gitfs_env_blacklist'] %}
  - {{ git_env }}
  {%- endfor -%}
{% else -%}
# gitfs_env_blacklist:
#   - bug/*
#   - feature/*
{% endif %}

# S3 File Server Backend Configuration
#
# S3 credentials must be set in the master config file.
# Alternatively, if on EC2 these credentials can be automatically
# loaded from instance metadata.
{% if 's3.keyid' in cfg_master -%}
{{ get_config('s3.keyid', '<no default>') }}
{{ get_config('s3.key', '<no default>') }}
{% else -%}
# s3.keyid: GKTADJGHEIQSXMKKRBJ08H
# s3.key: askdjghsdfjkghWupUjasdflkdfklgjsdfjajkghs
{% endif %}
# This fileserver supports two modes of operation for the buckets:
# - A single bucket per environment
# - Multiple environments per bucket
#
# Note that bucket names must be all lowercase both in the AWS console
# and in Salt, otherwise you may encounter SignatureDoesNotMatch
# errors.
#
# A multiple-environment bucket must adhere to the following root
# directory structure:
#
# s3://<bucket name>/<environment>/<files>
#
# This fileserver back-end requires the use of the MD5 hashing
# algorithm. MD5 may not be compliant with all security policies.
{% if 's3.buckets' in cfg_master -%}
{{ get_config('s3.buckets', '<no default>') }}
{% else -%}
# s3.buckets:                     #single bucket per environment
#   production:
#     - bucket1
#     - bucket2
#   staging:
#     - bucket3
#     - bucket4
#
# s3.buckets:                     #multiple environments per bucket
#   - bucket1
#   - bucket2
#   - bucket3
#   - bucket4
{% endif %}

#####         Pillar settings        #####
##########################################
# Salt Pillars allow for the building of global data that can be made selectively
# available to different minions based on minion grain filtering. The Salt
# Pillar is laid out in the same fashion as the file server, with environments,
# a top file and sls files. However, pillar data does not need to be in the
# highstate format, and is generally just key/value pairs.
{% if 'pillar_roots' in cfg_master -%}
{%- do default_keys.append('pillar_roots') %}
pillar_roots:
{%- for name, roots in cfg_master['pillar_roots']|dictsort %}
  {{ name }}:
{%- for dir in roots %}
    - {{ dir }}
{%- endfor -%}
{%- endfor -%}
{% elif 'pillar_roots' in cfg_salt -%}
pillar_roots:
{%- for name, roots in cfg_salt['pillar_roots']|dictsort %}
  {{ name }}:
{%- for dir in roots %}
    - {{ dir }}
{%- endfor -%}
{%- endfor -%}
{%- else -%}
#pillar_roots:
#  base:
#    - /srv/pillar
{%- endif %}

{% if 'ext_pillar' in cfg_master %}
{%- do default_keys.append('ext_pillar') %}
ext_pillar:
{%- for pillar in cfg_master['ext_pillar'] -%}
  {%- for key in pillar -%}
    {%- if pillar[key] is string %}
  - {{ key }}: {{ pillar[key] }}
    {#- Workaround for missing `is mapping` on CentOS 6, see #193: #}
    {%- elif pillar[key] is iterable and 'dict' not in pillar[key].__class__.__name__ %}
  - {{ key }}:
      {%- for parameter in pillar[key] %}
    - {{ parameter }}
      {%- endfor -%}
    {#- Workaround for missing `is mapping` on CentOS 6, see #193: #}
    {%- elif 'dict' in pillar[key].__class__.__name__ and pillar[key] is not string %}
  - {{ key }}: 
      {%- for parameter in pillar[key] %}
      {{ parameter }}: {{pillar[key][parameter]}}
      {%- endfor %}
    {%- else %}
# Error in rendering {{ key }}, please read https://docs.saltstack.com/en/latest/topics/development/external_pillars.html#configuration
    {% endif %}
  {%- endfor -%}
{%- endfor %}
{% elif 'ext_pillar' in cfg_salt %}
ext_pillar:
{% for pillar in cfg_salt['ext_pillar'] %}
  - {{ pillar.items()[0][0] }}: {{ pillar.items()[0][1] }}
{% endfor %}
{% else %}
#ext_pillar:
#  - hiera: /etc/hiera.yaml
#  - cmd_yaml: cat /etc/salt/yaml
{% endif %}

# The ext_pillar_first option allows for external pillar sources to populate
# before file system pillar. This allows for targeting file system pillar from
# ext_pillar.
{{ get_config('ext_pillar_first', 'False') }}

# The pillar_gitfs_ssl_verify option specifies whether to ignore ssl certificate
# errors when contacting the pillar gitfs backend. You might want to set this to
# false if you're using a git backend that uses a self-signed certificate but
# keep in mind that setting this flag to anything other than the default of True
# is a security concern, you may want to try using the ssh transport.
{{ get_config('pillar_gitfs_ssl_verify', 'True') }}

# The pillar_opts option adds the master configuration file data to a dict in
# the pillar called "master". This is used to set simple configurations in the
# master config file that can then be used on minions.
{{ get_config('pillar_opts', 'False') }}

# The pillar_safe_render_error option prevents the master from passing pillar
# render errors to the minion. This is set on by default because the error could
# contain templating data which would give that minion information it shouldn't
# have, like a password! When set true the error message will only show:
#   Rendering SLS 'my.sls' failed. Please see master log for details.
{{ get_config('pillar_safe_render_error', 'True') }}

# The pillar_source_merging_strategy option allows you to configure merging strategy
# between different sources. It accepts four values: recurse, aggregate, overwrite,
# or smart. Recurse will merge recursively mapping of data. Aggregate instructs
# aggregation of elements between sources that use the #!yamlex renderer. Overwrite
# will verwrite elements according the order in which they are processed. This is
# behavior of the 2014.1 branch and earlier. Smart guesses the best strategy based
# on the "renderer" setting and is the default value.
{{ get_config('pillar_source_merging_strategy', 'smart') }}

# Recursively merge lists by aggregating them instead of replacing them.
{{ get_config('pillar_merge_lists', False) }}

# Git External Pillar (git_pillar) Configuration Options
#
# Specify the provider to be used for git_pillar. Must be either pygit2 or
# gitpython. If unset, then both will be tried in that same order, and the
# first one with a compatible version installed will be the provider that
# is used.
{{ get_config('git_pillar_provider', 'pygit2') }}

# If the desired branch matches this value, and the environment is omitted
# from the git_pillar configuration, then the environment for that git_pillar
# remote will be base.
{{ get_config('git_pillar_base', 'master') }}

# If the branch is omitted from a git_pillar remote, then this branch will
# be used instead.
{{ get_config('git_pillar_branch', 'master') }}

# Environment to use for git_pillar remotes. This is normally derived from
# the branch/tag (or from a per-remote env parameter), but if set this will
# override the process of deriving the env from the branch/tag name.
{{ get_config('git_pillar_env', '') }}

# Path relative to the root of the repository where the git_pillar top file
# and SLS files are located.
{{ get_config('git_pillar_root', 'pillar') }}

# Specifies whether or not to ignore SSL certificate errors when contacting
# the remote repository.
{{ get_config('git_pillar_ssl_verify', True) }}

# When set to False, if there is an update/checkout lock for a git_pillar
# remote and the pid written to it is not running on the master, the lock
# file will be automatically cleared and a new lock will be obtained.
{{ get_config('git_pillar_global_lock', False) }}

# Git External Pillar Authentication Options
#
# Along with git_pillar_password, is used to authenticate to HTTPS remotes.
{{ get_config('git_pillar_user', '') }}

# Along with git_pillar_user, is used to authenticate to HTTPS remotes.
# This parameter is not required if the repository does not use authentication.
{{ get_config('git_pillar_password', '') }}

# By default, Salt will not authenticate to an HTTP (non-HTTPS) remote.
# This parameter enables authentication over HTTP.
{{ get_config('git_pillar_insecure_auth', False) }}

# Along with git_pillar_privkey (and optionally git_pillar_passphrase),
# is used to authenticate to SSH remotes.
{{ get_config('git_pillar_pubkey', '') }}

# Along with git_pillar_pubkey (and optionally git_pillar_passphrase),
# is used to authenticate to SSH remotes.
{{ get_config('git_pillar_privkey', '') }}

# This parameter is optional, required only when the SSH key being used
# to authenticate is protected by a passphrase.
{{ get_config('git_pillar_passphrase', '') }}

#####          Syndic settings       #####
##########################################
# The Salt syndic is used to pass commands through a master from a higher
# master. Using the syndic is simple. If this is a master that will have
# syndic servers(s) below it, then set the "order_masters" setting to True.
#
# If this is a master that will be running a syndic daemon for passthrough, then
# the "syndic_master" setting needs to be set to the location of the master server
# to receive commands from.

# Set the order_masters setting to True if this master will command lower
# masters' syndic interfaces.
{{ get_config('order_masters', 'False') }}

# If this master will be running a salt syndic daemon, syndic_master tells
# this master where to receive commands from.
{{ get_config('syndic_master', 'masterofmaster') }}

# This is the 'ret_port' of the MasterOfMaster:
{{ get_config('syndic_master_port', '4506') }}

# PID file of the syndic daemon:
{{ get_config('syndic_pidfile', '/var/run/salt-syndic.pid') }}

# LOG file of the syndic daemon:
{{ get_config('syndic_log_file', 'syndic.log') }}

# The user under which the salt syndic will run.
{{ get_config('syndic_user', 'root') }}

#####      Peer Publish settings     #####
##########################################
# Salt minions can send commands to other minions, but only if the minion is
# allowed to. By default "Peer Publication" is disabled, and when enabled it
# is enabled for specific minions and specific commands. This allows secure
# compartmentalization of commands based on individual minions.

# The configuration uses regular expressions to match minions and then a list
# of regular expressions to match functions. The following will allow the
# minion authenticated as foo.example.com to execute functions from the test
# and pkg modules.
#peer:
#  foo.example.com:
#    - test.*
#    - pkg.*
#
# This will allow all minions to execute all commands:
#peer:
#  .*:
#    - .*
#
# This is not recommended, since it would allow anyone who gets root on any
# single minion to instantly have root on all of the minions!
{% if 'peer' in cfg_master %}
{%- do default_keys.append('peer') %}
peer:
  {% for name, roots in cfg_master['peer'].items() %}
  {{ name }}:
    {% for mod in roots %}
      - {{ mod }}
    {% endfor %}
  {% endfor %}
{% elif 'peer' in cfg_salt %}
peer:
  {% for name, roots in cfg_salt['peer'].items() %}
  {{ name }}:
    {% for mod in roots %}
      - {{ mod }}
    {% endfor %}
  {% endfor %}
{% endif %}

# Minions can also be allowed to execute runners from the salt master.
# Since executing a runner from the minion could be considered a security risk,
# it needs to be enabled. This setting functions just like the peer setting
# except that it opens up runners instead of module functions.
#
# All peer runner support is turned off by default and must be enabled before
# using. This will enable all peer runners for all minions:
#peer_run:
#  .*:
#    - .*
#
# To enable just the manage.up runner for the minion foo.example.com:
#peer_run:
#  foo.example.com:
#    - manage.up
{% if 'peer_run' in cfg_master %}
{%- do default_keys.append('peer_run') %}
peer_run:
  {% for name, roots in cfg_master['peer_run'].items() %}
  {{ name }}:
    {% for mod in roots %}
      - {{ mod }}
    {% endfor %}
  {% endfor %}
{% elif 'peer_run' in cfg_salt %}
peer_run:
  {% for name, roots in cfg_salt['peer_run'].items() %}
  {{ name }}:
    {% for mod in roots %}
      - {{ mod }}
    {% endfor %}
  {% endfor %}
{% endif %}

#####         Mine settings     #####
#####################################
# Restrict mine.get access from minions. By default any minion has a full access
# to get all mine data from master cache. In acl definion below, only pcre matches
# are allowed.
# mine_get:
#   .*:
#     - .*
#
# The example below enables minion foo.example.com to get 'network.interfaces' mine
# data only, minions web* to get all network.* and disk.* mine data and all other
# minions won't get any mine data.
{% if 'mine_get' in cfg_master -%}
{%- do default_keys.append('mine_get') %}
mine_get:
{%- for minion, data in cfg_master['mine_get']|dictsort %}
  {{ minion }}:
{%- for command in data %}
    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
{%- endfor -%}
{%- endfor -%}
{% elif 'mine_get' in cfg_salt -%}
mine_get:
{%- for minion, data in cfg_salt['mine_get']|dictsort %}
  {{ minion }}:
{%- for command in data %}
    - {% raw %}'{% endraw %}{{ command }}{% raw %}'{% endraw %}
{%- endfor -%}
{%- endfor -%}
{% else -%}
# mine_get:
#   foo.example.com:
#     - network.interfaces
#   web.*:
#     - network.*
#     - disk.*
{%- endif %}

#####         Logging settings       #####
##########################################
# The location of the master log file
# The master log can be sent to a regular file, local path name, or network
# location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
# ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
# format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
#log_file: /var/log/salt/master
#log_file: file:///dev/log
#log_file: udp://loghost:10514

{{ get_config('log_file', '/var/log/salt/master') }}
{{ get_config('key_logfile', '/var/log/salt/key') }}

# The level of messages to send to the console.
# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
#
# The following log levels are considered INSECURE and may log sensitive data:
# ['garbage', 'trace', 'debug']
#
{{ get_config('log_level', 'warning') }}

# The level of messages to send to the log file.
# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
# If using 'log_granular_levels' this must be set to the highest desired level.
{{ get_config('log_level_logfile', 'warning') }}

# The date and time format used in log messages. Allowed date/time formating
# can be seen here: http://docs.python.org/library/time.html#time.strftime
{{ get_config('log_datefmt', "'%H:%M:%S'") }}
{{ get_config('log_datefmt_logfile', "'%Y-%m-%d %H:%M:%S'") }}

# The format of the console logging messages. Allowed formatting options can
# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
#
# Console log colors are specified by these additional formatters:
#
# %(colorlevel)s
# %(colorname)s
# %(colorprocess)s
# %(colormsg)s
#
# Since it is desirable to include the surrounding brackets, '[' and ']', in
# the coloring of the messages, these color formatters also include padding as
# well.  Color LogRecord attributes are only available for console logging.
#
{{ get_config('log_fmt_console', "'%(colorlevel)s %(colormsg)s'") }}
{{ get_config('log_fmt_console', "'[%(levelname)-8s] %(message)s'") }}

{{ get_config('log_fmt_logfile', "'%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s'") }}

# This can be used to control logging levels more specificically.  This
# example sets the main salt library at the 'warning' level, but sets
# 'salt.modules' to log at the 'debug' level:
#   log_granular_levels:
#     'salt': 'warning'
#     'salt.modules': 'debug'
#
{% if 'log_granular_levels' in cfg_master %}
{%- do default_keys.append('log_granular_levels') %}
log_granular_levels:
  {% for name, lvl in cfg_master['log_granular_levels'].items() %}
  {{ name }}: {{ lvl }}
  {% endfor %}
{% elif 'log_granular_levels' in cfg_salt %}
log_granular_levels:
  {% for name, lvl in cfg_salt['log_granular_levels'].items() %}
  {{ name }}: {{ lvl }}
  {% endfor %}
{% else %}
#log_granular_levels: {}
{% endif %}

#####         Node Groups           ######
##########################################
# Node groups allow for logical groupings of minion nodes. A group consists of a group
# name and a compound target.
#nodegroups:
#  group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com and bl*.domain.com'
#  group2: 'G@os:Debian and foo.domain.com'
{%- if 'nodegroups' in cfg_master %}
{%- do default_keys.append('nodegroups') %}
nodegroups:
  {%- for name, lvl in cfg_master['nodegroups'].items() %}
  {{ name }}: {{ lvl }}
  {%- endfor %}
{%- elif 'nodegroups' in cfg_salt %}
nodegroups:
  {%- for name, lvl in cfg_salt['nodegroups'].items() %}
  {{ name }}: {{ lvl }}
  {%- endfor %}
{%- endif %}

#####     Range Cluster settings     #####
##########################################
# The range server (and optional port) that serves your cluster information
# https://github.com/ytoolshed/range/wiki/%22yamlfile%22-module-file-spec
#
{{ get_config('range_server', 'range:80') }}


#####  Windows Software Repo settings #####
###########################################
# Specify the provider to be used for git_pillar. Must be either pygit2 or
# gitpython. If unset, then both will be tried in that same order, and the
# first one with a compatible version installed will be the provider that
# is used.
{{ get_config('winrepo_provider', 'pygit2') }}

# Repo settings for 2015.8+ master used with 2015.8+ Windows minions
#
# Location of the repo on the master:
{{ get_config('winrepo_dir_ng', '/srv/salt/win/repo-ng') }}

# List of git repositories to include with the local repo:
{% if 'winrepo_remotes_ng' in cfg_master %}
{%- do default_keys.append('winrepo_remotes_ng') %}
winrepo_remotes_ng:
  {% for repo in cfg_master['winrepo_remotes_ng'] %}
  - {{ repo }}
  {% endfor %}
{% elif 'winrepo_remotes_ng' in cfg_salt %}
winrepo_remotes_ng:
  {% for repo in cfg_salt['winrepo_remotes_ng'] %}
  - {{ repo }}
  {% endfor %}
{% else %}
#winrepo_remotes_ng:
#  - 'https://github.com/saltstack/salt-winrepo-ng.git'
{% endif %}

# Repo settings for 2015.8+ master used with pre-2015.8 Windows minions
#
# Location of the repo on the master:
{{ get_config('winrepo_dir', '/srv/salt/win/repo') }}

# Location of the master's repo cache file:
{{ get_config('winrepo_cachefile', 'winrepo.p') }}

# List of git repositories to include with the local repo:
{% if 'winrepo_remotes' in cfg_master %}
{%- do default_keys.append('winrepo_remotes') %}
winrepo_remotes:
  {% for repo in cfg_master['winrepo_remotes'] %}
  - {{ repo }}
  {% endfor %}
{% elif 'winrepo_remotes' in cfg_salt %}
winrepo_remotes:
  {% for repo in cfg_salt['winrepo_remotes'] %}
  - {{ repo }}
  {% endfor %}
{% else %}
#winrepo_remotes:
#  - 'https://github.com/saltstack/salt-winrepo.git'
{% endif %}

#####  Windows Software Repo settings - Pre 2015.8 #####
########################################################
# Legacy repo settings for pre-2015.8 Windows minions.
#
# Location of the repo on the master:
{{ get_config('win_repo', '/srv/salt/win/repo') }}

# Location of the master's repo cache file:
{{ get_config('win_repo_mastercachefile', '/srv/salt/win/repo/winrepo.p') }}

# List of git repositories to include with the local repo:
{% if 'win_gitrepos' in cfg_master %}
{%- do default_keys.append('win_gitrepos') %}
win_gitrepos:
  {% for repo in cfg_master['win_gitrepos'] %}
  - {{ repo }}
  {% endfor %}
{% elif 'win_gitrepos' in cfg_salt %}
win_gitrepos:
  {% for repo in cfg_salt['win_gitrepos'] %}
  - {{ repo }}
  {% endfor %}
{% else %}
#winrepo_remotes:
#  - 'https://github.com/saltstack/salt-winrepo.git'
{% endif %}

#####      Returner settings          ######
############################################
# Which returner(s) will be used for minion's result:
#return: mysql
{{ get_config('return', '')}}


######     Miscellaneous settings     ######
############################################
# Default match type for filtering events tags: startswith, endswith, find, regex, fnmatch
{{ get_config('event_match_type', 'startswith') }}

{%- if 'halite' in cfg_master %}
{%- do default_keys.append('halite') %}
#####             Halite             #####
##########################################
halite:
  {%- for name, value in cfg_master['halite'].items() %}
  {{ name }}: {{ value }}
  {%- endfor %}
{%- endif %}

{%- if 'rest_cherrypy' in cfg_master %}
{%- do default_keys.append('rest_cherrypy') %}
#####         rest_cherrypy          #####
##########################################
rest_cherrypy:
  {%- for name, value in cfg_master['rest_cherrypy'].items() %}
  {{ name }}: {{ value }}
  {%- endfor %}
{%- endif %}

{%- if 'rest_tornado' in cfg_master %}
{%- do default_keys.append('rest_tornado') %}
#####         rest_tornado            #####
###########################################
rest_tornado:
  {%- for name, value in cfg_master['rest_tornado'].items() %}
  {{ name }}: {{ value }}
  {%- endfor %}
{%- endif %}

{%- if 'presence_events' in cfg_master %}
#####        presence events         #####
##########################################
{{ get_config('presence_events', 'False') }}
{%- endif %}

{%- if 'consul_config' in cfg_master %}
{%- do default_keys.append('consul_config') %}
#####         consul_config          #####
##########################################
consul_config:
  {%- for name, value in cfg_master['consul_config'].items() %}
  {{ name }}: {{ value }}
  {%- endfor %}
{%- endif %}

{% if 'mongo' in cfg_master -%}
{%- do default_keys.append('mongo') %}
#####   mongodb connection settings  #####
##########################################
{%- for name, value in cfg_master['mongo'].items() %}
mongo.{{ name }}: {{ value }}
{%- endfor %}

{% if 'alternative.mongo' in cfg_master -%}
{%- do default_keys.append('alternative.mongo') %}
{%- for name, value in cfg_master['alternative.mongo'].items() %}
alternative.mongo.{{ name }}: {{ value }}
{%- endfor %}
{% endif %}
{%- endif %}

{%- for configname in cfg_master %}
{%- if configname not in reserved_keys and configname not in default_keys %}
{{ configname }}: {{ cfg_master[configname]|json }}
{%- endif %}
{%- endfor %}