Use "binding:TrimSpace" instead of fragile IsEmptyString
And fix a bug in locale's `HasKey`: it should also try the default
language if current language doesn't have the translation key, a new
test is added.
Environment variables must be applied to the "install form" config
before the config values are used.
Fixes#38911
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Better than before, still not good enough (more work can be done in the
future)
And add the missing error handling in the PrivateContext "bind"
middleware.
By the way, picked some "TrimSpace" changes from "fix: trim whitespace
from SMTP address and port - #38934" (fix#38926)
Toasts now use the same tinted backgrounds and borders as the flash
messages, replacing the solid full-color style. The first commit reverts
https://github.com/go-gitea/gitea/pull/38842, the second re-applies it
with tinting.
---------
Co-authored-by: silverwind <me@silverwind.io>
- only `cache-seeder` writes caches, every other workflow restores.
Saves were being rejected once the repo went over its cache budget,
leaving main's caches stale and PR runs building cold
- seed the pnpm store and uv caches next to the go ones, so PRs
warm-start on them rather than installing from scratch
- prune keeps a single generation per key, including across go versions,
where a toolchain bump leaves the previous build cache unusable.
Reclaims ~2.6 GB immediately
- prune runs every 6h instead of daily and trims to 6 GB, since CodeQL
writes ~200 MB per push to main from outside this repo's workflows
- pull requests and release branches no longer write pnpm, uv and binfmt
caches, whose ref-scoped copies are never read again
---------
Signed-off-by: silverwind <me@silverwind.io>
Run them in headless [vitest browser
mode](https://vitest.dev/guide/browser/) in chromium and firefox.
Similar UX than current tests, it's about 5 times as slow (goes from 1s
to 5s on my machine), but definitely worth it as it removes all
happy-dom problems.
---------
Signed-off-by: silverwind <me@silverwind.io>
Admin and write team authorize now grant that mode on every unit,
including units added later, instead of only rows present in
`team_unit`. Granular teams keep `authorize=none` and explicit unit
rows.
Closes the `TEAM-UNIT-PERMISSION` design gap from
https://github.com/go-gitea/gitea/pull/34128.
Maybe also fix#15962 (actually maybe it had been fixed before, the root
cause is out-of-sync "access" table)
## Screenshots
only writing selected:
<img width="1399" height="1007" alt="image"
src="https://github.com/user-attachments/assets/1d1b4c49-a59a-47b6-998f-0464a067395b"
/>
_Created with the help of AI_
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Add a GitHub-style quick repo switcher: a caret next to the owner/repo
breadcrumb
opens a dropdown that lists and searches the current owner's
repositories and
navigates to the selected one. The current repository is marked with a
check, and
private/fork repos show an icon.
Also, fix various bugs in fomtantic dropdown remote query
## Screenshots
<img width="505" height="198" alt="image"
src="https://github.com/user-attachments/assets/9f673d1b-fe60-41f0-b9e2-b00dc43720b5"
/>
Fixes#38187
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes#38872
Labels in the label selection dropdown (issue/PR sidebar, new issue
form) were always listed alphabetically, so a scoped set like the
default Priority labels showed up as Critical, High, Low, Medium even
though each label carries an exclusive order.
This adds `CompareLabelForDisplay`/`SortLabelsForDisplay` in
`models/issues`: labels are grouped by their exclusive scope and sorted
by exclusive order within a scope (unordered ones last), falling back to
name order. The sorting is applied to the issue page sidebar data and
the shared label filter data, so the filter dropdown on the issue list
gets the same ordering.
Unscoped labels are unaffected and still sort by name. Includes a unit
test covering the default Priority label set.
Lets users regenerate a personal access token's value in place, keeping
its name and scopes, instead of deleting and recreating it. Useful when
a token was shared with a third party (e.g. an AI agent) and needs to
be invalidated immediately without redoing scope selection.
Follows the same pattern already used for OAuth2 application client
secrets (`GenerateClientSecret`/`RegenerateSecret`).
**Testing**: added a model unit test and a web integration test;
manually
verified in the running dev server that the old token stops
authenticating
and the new one works immediately after regenerating.
<img width="1040" height="245" alt="image"
src="https://github.com/user-attachments/assets/4de0d8b4-1fc4-49cf-a859-95e24d0b2c0a"
/>
Fixes#38683.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Containerbase declares `node` as the parent of `pnpm`, so `install-tool
pnpm` aborts with `MissingParent` (exit 16) when node was never
installed as a containerbase tool. Renovate's npm manager installs node
itself, so this only breaks on branches without an npm update, where the
failed install blocks every post-upgrade command including `make tidy`,
leaving an untidy `go.sum` behind.
Seen on https://github.com/go-gitea/gitea/pull/38914.
Verified in `ghcr.io/renovatebot/renovate:latest`:
```
install-tool pnpm 11.22.0 exit=16
FATAL: parent tool not installed tool: "pnpm" parent: "node"
install-tool node 22.18.0 && install-tool pnpm 11.22.0 exit=0
```
The dashboard activity feed was paginated with `[ui.user]
REPO_PAGING_NUM`
instead of `[ui] FEED_PAGING_NUM`.
The wrong setting was picked up when the page size was hoisted into a
local
variable in https://github.com/go-gitea/gitea/pull/34994, most likely
copied
from the `dashboardRepoList` block a few lines above. `REPO_PAGING_NUM`
should
only control repository lists.
Fixes https://github.com/go-gitea/gitea/issues/38925
Release binaries and downloads have been served from Cloudflare R2 for a
while now, so the AWS S3 upload is redundant.
This removes the `configure aws` and `upload binaries to s3` steps from
the nightly, RC and version release workflows. Since
`configure-aws-credentials` no longer runs in those jobs, the
`AWS_REGION: auto` workaround in the R2 step can be dropped as well.
The `AWS_*` secrets for S3 can be removed from the repository settings
afterwards.
1. the fragile `document.querySelector('.repository.wiki.new
.ui.form')!` is broken (again), rewrite to "data-global-init"
* regression from #37571 because a new form was added
3. use "form-fetch-action" and JSON response instead of
"RenderWithErrDeprecated"
GitHub migrations accept multiple comma-separated OAuth tokens, but
clients with unknown rate data are never selected. After the first
client is used, every later token stays unknown and can never
participate in quota-aware selection.
Select each client with unknown rate data once before falling back to
the existing highest-remaining-rate choice. The regression test covers
initial probing of all clients and then selection by remaining quota.
Fixes https://github.com/go-gitea/gitea/issues/34342
Assisted-by: Codex:GPT-5
---------
Co-authored-by: silverwind <me@silverwind.io>
`github.event.inputs` must mirror the raw `workflow_dispatch` payload,
where
GitHub keeps every input as a string. Only the separate `inputs` context
preserves declared types, e.g. booleans. A previous fix coerced boolean
inputs in the single map that fed both contexts, so
`github.event.inputs.someBool` became a real boolean and comparisons
like
`== 'true'` stopped matching.
`github.event.inputs` now stays string-only again. The `inputs` context
used
for server-side `if:` evaluation of needs-gated/matrix-deferred jobs
re-coerces booleans independently, from the job's own workflow
declaration,
so that path keeps working correctly.
Fixes https://github.com/go-gitea/gitea/issues/38896
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Fixes#38773
## Background
Artifacts became attempt-scoped in #37119, and the runner-facing
artifact APIs filter strictly by the attempt of the running job. "Re-run
failed jobs" creates a new attempt whose passed-through jobs never
upload their artifacts again, so a re-run job that downloads one of them
fails with "artifact not found".
## Fix
The read paths (v3 and v4 list and download) now resolve artifacts
across the running job's attempt plus the attempts it inherits from, and
an inherited artifact is shadowed by a same-named one from a newer
attempt.
## Note
GitHub's documentation does not document these behaviors. The
conclusions below are based on manual testing, so consistency with
GitHub cannot be guaranteed.
- In a "partial re-run", a job can download artifacts uploaded by an
earlier attempt, every attempt keeps its own copy of a name, and a
lookup by name resolves to the newest one.
- A full "Re-run all jobs" never downloads artifacts from earlier
attempts.
---------
Co-authored-by: bircni <bircni@icloud.com>
For a `pull_request_target` (PRT) run, Gitea loads the top-level
workflow from the trusted base branch, but any local reusable workflow
it calls (`uses: ./...`) was read from the PR **head** commit, which the
fork author controls.
## Fix
**Record the source commit where the content is read.**
`DetectedWorkflow` now carries a `SourceCommitSHA` filled in next to
`Content`, so the PRT detection pass at the base commit records the base
SHA automatically.
**Defense in depth.** `loadReusableWorkflowSource` pins the PR base
commit for a PRT run's local `uses: ./...` rather than trusting the
stored SHA. This also covers runs recorded before this change, whose
rows still hold the head SHA and would otherwise resolve from the fork
on rerun.
Existing run rows are not migrated.
---------
Co-authored-by: Zettat <zettat123@gmail.com>
This is a prepare and required step for upcoming Gitea Official Mobile
APP which supports login with OAuth2.
The official Gitea mobile app needs the same mechanism. This adds a
builtin application for it:
| | |
|---|---|
| client ID | `b757811a-05c8-4c76-8d74-a5ee3d2073f2` |
| config name | `gitea-app` |
| display name | `Gitea App` |
| redirect URI | `com.gitea.app://oauth/callback` |
Unlike the existing entries, which are CLIs and can therefore use a
loopback `http://127.0.0.1` redirect, a mobile app authorises through a
system browser session (`ASWebAuthenticationSession` on iOS, Custom Tabs
on Android) that can only receive a custom-scheme callback, hence the
custom scheme here.
silverwind
Giteabot
wxiaoguangandGitHub
Minjie FangandGitHub
Hsukqi LeeandGitHub
Lunny XiaoandGitHub
